Научная визуализация, 2026, том 18, номер 3, страницы 52 - 62, DOI: 10.26583/sv.18.3.05
Image Processing Methods for the Problem of Plasma Control of the Bow Shock Wave
Авторы: O.V. Kravchenko1,A, T.A. Lapushkina2,A, B, E.V. Reshetova3,A, O.A. Azarova4,A
A Federal Research Center “Computer Science and Control” of the Russian Academy of Sciences, Moscow, Russia
B Ioffe Institute, Saint-Petersburg, Russia
1 ORCID: 0000-0002-7651-3422, okravchenko@frccsc.ru
2 ORCID: 0000-0001-9161-446X, tlapushkina@frccsc.ru
3 ORCID: 0009-0001-1244-2792, ereshetova@frccsc.ru
4 ORCID: 0000-0002-3896-2470, oazarova@frccsc.ru
Аннотация
This paper presents an image processing procedure for experimental and numerical study of problems of plasma high-speed flow control. The experiments were conducted using a shock tube setup with an aerodynamic model placed in a high-speed flow. The impact zone was organized at the leading edge of the body by creating a local plasma gas discharge region. Flow visualization was performed using a pulsed laser schlieren system, which allows obtaining images of flow dynamics under the influence of discharge plasma. To extract quantitative data from the visualizations, an image processing pipeline was developed, including pre-processing, selection of the region of interest, and an adaptive thresholding setup for extracting information about the geometry of the plasma discharge luminosity region. This made it possible to perform numerical modeling of the two-dimensional Navier-Stokes equations for a viscous heat-conducting gas with a real source geometry. The plasma discharge was modeled as a localized energy deposition zone. For high-precision reconstruction of the flow field, a complex-conservative difference scheme of the second order on a shifted grid was used. The calculated position of the front of the bow shock wave (BSW) on the symmetry axis showed agreement with its position on the experimental schlieren image, confirming the qualitative adequacy of the numerical model. Quantitative comparison of the energy input the difference between the experimental and calculated values of the discharge power did not exceed 1%. The results showed that the presented image processing procedure opens up an approach to high accuracy prediction of the dynamics of high-speed flows.
Ключевые слова: image processing, bow shock wave, plasma flow control, schlieren visualization, numerical simulation, energy deposition.